利博·(集团)有限公司官网

DESCRIPTION

The ACT5270 is a highly integrated superscalar microprocessor that implements a superset of the MIPS IV Instruction Set Architecture(ISA). It has a high performance 64-bit integer unit, a high throughput, fully pipelined 64-bit floating point unit, an operating system friendly memory management unit with a 48-entry fully associative TLB, a 16 KByte 2-way set associative instruction cache, a 16 KByte 2-way set associative data cache, and a high-performance 64-bit system interface with support for an optional external secondary cache. The ACT5270 can issue both an integer and a floating point instruction in the same cycle.

Features

■ Full militarized QED RM5270 microprocessor

■ Dual Issue superscalar microprocessor - can issue one integer and one floating-point instruction per cycle

● 133, 150, 200 MHz operating frequencies – Consult Factory for latest speeds

● 260 Dhrystone2.1 MIPS

● SPECInt95 5.0, SPECfp95 5.3

■ High performance system interface compatible with RM5260, R4600, R4700 and R5000

● 64-bit multiplexed system address/data bus for optimum price/ performance with up to 100 MHz operating frequency

● High performance write protocols maximize uncached write bandwidth

● Supports clock divisors (2, 3, 4, 5, 6, 7, 8)

● 5V compatible I/O’s

● IEEE 1149.1 JTAG boundary scan

■ Integrated on-chip caches

● 16KB instruction - 2 way set associative

● 16KB data - 2 way set associative

● Virtually indexed, physically tagged

● Write-back and write-through on per page basis

● Pipeline restart on first double for data cache misses

■ Integrated memory management unit

● Fully associative joint TLB (shared by I and D translations)

● 48 dual entries map 96 pages

● Variable page size (4KB to 16MB in 4x increments)

■ Integrated secondary cache controller (R5000 compatible)

● Supports 512K or 2MByte block write-through secondary

■ High-performance floating point unit

● Single cycle repeat rate for common single precision operations and some double precision operations

● Two cycle repeat rate for double precision multiply and double precision combined multiply-add operations

● Single cycle repeat rate for single precision combined multiplyadd operation

■ MIPS IV instruction set

● Floating point multiply-add instruction increases performance in signal processing and graphics applications

● Conditional moves to reduce branch frequency

● Index address modes (register + register)

■ Embedded application enhancements

● Specialized DSP integer Multiply-Accumulate instruction and 3 operand multiply instruction

● I and D cache locking by set

● Optional dedicated exception vector for interrupts

■ Fully static CMOS design with power down logic

● Standby reduced power mode with WAIT instruction

● 6 Watts typical at 3.3V 200 MHz

■ 208-lead CQFP, cavity-up package (F17)

■ 208-lead CQFP, inverted footprint (F24), Intended to duplicate the commercial QED footprint

■ 179-pin PGA package (Future Product) (P10)