Àû²©¡¤(¼¯ÍÅ)ÓÐÏÞ¹«Ë¾¹ÙÍø

Description

The FAN7530 is an active power factor correction (PFC) controller for the boost PFC applications that operates in critical conduction mode (CRM). It uses the voltage mode PWM that compares an internal ramp signal with the error amplifier output to generate MOSFET turn-off signal. Because the voltage mode CRM PFC controller does not need the rectified AC line voltage information, it can save the power loss of the input voltage sensing network necessary for the current mode CRM PFC controller.

FAN7530 provides many protection functions such as over voltage protection, open-feedback protection, over current protection, and under-voltage lockout protection. The FAN7530 can be disabled if the INV pin voltage is lower than 0.45V and the operating current decreases to 65?A. Using a new variable on-time control method, THD is lower than the conventional CRM boost PFC ICs.

Features

¡ö Low Total Harmonic Distortion (THD)

¡ö Precise Adjustable Output Over-Voltage Protection

¡ö Open-Feedback Protection and Disable Function

¡ö Zero Current Detector

¡ö 150?s Internal Start-up Timer

¡ö MOSFET Over-Current Protection

¡ö Under-Voltage Lockout with 3.5V Hysteresis

¡ö Low Start-up (40?A) and Operating Current (1.5mA)

¡ö Totem Pole Output with High State Clamp

¡ö +500/-800mA Peak Gate Drive Current

¡ö 8-pin DIP or 8-pin SOP

Applications

¡ö Adapter

¡ö Ballast

¡ö LCD TV, CRT TV

¡ö SMPS