利博·(集团)有限公司官网

GENERAL DESCRIPTION

The MX29LV040C is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29LV040C is packaged in 32-pin PLCC and TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

? Extended single - supply voltage range 2.7V to 3.6V

? 524,288 x 8 only

? Single power supply operation

- 3.0V only operation for read, erase and program operation

? Fully compatible with MX29LV040 device

? Fast access time: 55R/70/90ns

? Low power consumption

- 30mA maximum active current

- 0.2uA typical standby current

? Command register architecture

- 8 equal sector of 64K-Byte each

- Byte Programming (9us typical)

- Sector Erase (Sector structure 64K-Byte x8)

? Auto Erase (chip & sector) and Auto Program

- Automatically erase any combination of sectors with Erase Suspend capability.

- Automatically program and verify data at specified address

? Erase suspend/Erase Resume

- Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.

? Status Reply

- Data# Polling & Toggle bit for detection of program and erase operation completion.

? Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

- Any combination of sectors can be erased with erase suspend/resume function

? CFI (Common Flash Interface) compliant

- Flash device parameters stored on the device and provide the host system to access

? 100,000 minimum erase/program cycles

? Latch-up protected to 100mA from -1V to VCC+1V

? Package type:

- 32-pin PLCC

- 32-pin TSOP

- All Pb-free devices are RoHS Compliant

? Compatibility with JEDEC standard

- Pinout and software compatible with single-power supply Flash

? 20 years data retention