利博·(集团)有限公司官网

GENERAL DESCRIPTION

The PIC10F200/202/204/206 devices from Microchip Technology are low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions are single cycle (1μs) except for program branches, which take two cycles. The PIC10F200/202/204/206 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, result ing in a typical 2:1 code compression over other 8-bit

microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:

? Only 33 single-word instructions to learn

? All single-cycle instructions except for program branches, which are two-cycle

? 12-bit wide instructions

? 2-level deep hardware stack

? Direct, Indirect and Relative Addressing modes for data and instructions

? 8-bit wide data path

? 8 Special Function Hardware registers

? Operating speed:

- 4 MHz internal clock

- 1μs instruction cycle

Special Microcontroller Features:

? 4 MHz precision internal oscillator:

- Factory calibrated to ±1

? In-Circuit Serial Programming? (ICSP?)

? In-Circuit Debugging (ICD) support

? Power-on Reset (POR)

? Device Reset Timer (DRT)

? Watchdog Timer (WDT) with dedicated on-chip RC oscillator for reliable operation

? Programmable code protection

? Multiplexed MCLRinput pin

? Internal weak pull-ups on I/O pins

? Power-Saving Sleep mode

? Wake-up from Sleep on pin change

Low-Power Features/CMOS Technology:

? Operating Current:

- < 175μA @ 2V, 4 MHz, typical

? Standby Current:

- 100 nA @ 2V, typical

? Low-power, high-speed Flash technology:

- 100,000 Flash endurance

- > 40 year retention

? Fully static design

? Wide operating voltage range: 2.0V to 5.5V

? Wide temperature range:

- Industrial: -40°C to +85°C

- Extended: -40°C to +125°C

Peripheral Features (PIC10F200/202):

? 4 I/O pins:

- 3 I/O pins with individual direction control

- 1 input-only pin

- High current sink/source for direct LED drive

- Wake-on-change

- Weak pull-ups

? 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler

Peripheral Features (PIC10F204/206):

? 4 I/O pins:

- 3 I/O pins with individual direction control

- 1 input-only pin

- High current sink/source for direct LED drive

- Wake-on-change

- Weak pull-ups

? 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler

? 1 Comparator:

- Internal absolute voltage reference

- Both comparator inputs visible externally

- Comparator output visible externally