利博·(集团)有限公司官网

The NCV57200 is a high voltage gate driver with one non- isolated

low side gate driver and one galvanic isolated high or low side gate

driver. It can directly drive two IGBTs in a half bridge configuration.

Isolated high side driver can be powered with an isolated power supply

or with Bootstrap technique from the low side power supply.

The galvanic isolation for the high side gate driver guarantees

reliable switching in high power applications for IGBTs that operate

up to 800 V, at high dv/dt. The optimized output stages provide a mean

of reducing IGBT losses. Its features include two independent inputs

with deadtime and interlock, accurate asymmetric UVLOs, and short

and matched propagation delays. The NCV57200 operates with its

VCC/VB up to 20 V.

Features

? High Peak Current Output (+1.9 A / - 2.3 A)

? Low Output Voltage Drop for Enhanced IGBT Conduction

? Secured Output Low State without VDD/VB

? Floating Channel for Bootstrap Operation up to +800 V

? CMTI up to 50 kV / ms

? Reliable Operation for VS Negative Swing to - 800 V

? VDD & VBS Supply Range up to 20 V

? 3.3 V, 5 V, and 15 V Logic Input

? Asymmetric Under Voltage Lockout Thresholds for High Side and

Low Side

? Matched Propagation Delay 90 ns

? Built- in 20 ns Minimum Pulse Width Filter (or Input Noise Filter)

? Built- in 340 ns Dead- Time and High and Low Inputs Interlock

? Output in Phase with Input Signal

? AEC- Q100 Qualified and PPAP Capable

? This Device is Pb- Free, Halogen Free/BFR Free and is RoHS

Compliant

Typical Applications

? OBC

? PTC Heater

? e- Compressors

? Automotive Power Supplies