利博·(集团)有限公司官网

SIL type SSR with 9mm thickness controls up to 3A

FEATURES

1. Slim with 9 mm .354 inch thickness

The thin type (45 mm long × 24 mm high

× 9 mm wide) (1.772×.945×.354 inch)

permits high density mounting.

2. Excellent in noise resistance

Since the input and output are insulated

by the phototriac coupler, the noise on

the output side is not fed back to the input

side.

3. Snubber circuit integrated

The snubber circuit is integrated to

prevent malfunction caused by the rapid

rise of the voltage on the output side,

such as inductive load and noise.

4. Zero-cross and random types are available.

The zero-cross type generates minimal

noise by suppressing occurrence of radio

frequency interference (RFI) and electro

magnetic interference (EMI).

The random type features a short

operation time which permits phase

control.

5. High dielectric strength: 3,000 V AC

(between input and output)

6. Two kinds of terminals distance are

available. (5.08 mm and 7.62 mm) (.200 and .300 inch)

7. High reliability, long life and maintenance-free

TYPICAL APPLICATIONS

1. Most suitable as drivers for small

size AC motors, solenoids, solenoid

valves and so on.

2. Copying equipment

3. Air conditioners

4. Industrial equipment such as NC

machines, sequencers, robots, etc.