利博·(集团)有限公司官网

1 Features

? Qualified for automotive applications

? Core

– Arm? 32-bit Cortex?-M0+ CPU with memory

protection unit, frequency up to 80 MHz

? Operating characteristics

– Extended temperature: –40°C up to 125°C

– Wide supply voltage range: 1.62 V to 3.6 V

? Memories

– Up to 128KB of flash memory with error

correction code (ECC)

– Up to 32KB of SRAM with hardware parity

? High-performance analog peripherals

– Two simultaneous sampling 12-bit 4-Msps

analog-to-digital converters (ADCs) with up to

17 external channels

? 14-bit effective resolution at 250-ksps with

hardware averaging

– One 12-bit 1-MSPS digital-to-analog converter

with integrated output buffer (DAC)

– Two zero-drift zero-crossover chopper op-amps

(OPA)

? 0.5-μV/°C drift with chopping

? Integrated programmable gain stage, up to

32x

– One general-purpose amplifier (GPAMP)

– Three high-speed comparators (COMP) with 8-

bit reference DACs

? 32-ns propagation delay in high-speed

mode

? Support low-power mode operation down to

0.7 μA

– Programmable analog connections between

ADC, OPAs, COMP and DAC

– Configurable 1.4-V or 2.5-V internal shared

voltage reference (VREF)

– Integrated temperature sensor

– Integrated supply monitor

? Optimized low-power modes

– RUN: 96 μA/MHz (CoreMark)

– SLEEP: 467 μA at 4 MHz

– STOP: 46 μA at 32 kHz

– STANDBY: 1.5 μA with RTC and SRAM

retention

– SHUTDOWN: 80 nA with IO wake-up capability

? Intelligent digital peripherals

– 7-channel DMA controller

– Math accelerator supports DIV, SQRT, MAC

and TRIG computations

– Seven timers supports up to 22 PWM channels

? One 16-bit general-purpose timer

? One 16-bit general-purpose timer supports

QEI

? Two 16-bit general-purpose timers support

low-power operation in STANDBY mode

? One 32-bit high-resolution general-purpose

timer

? Two 16-bit advanced timers with deadband

support up to 12 PWM channels

– Two window-watchdog timers

– RTC with alarm and calendar mode

? Enhanced communication interfaces

– Four UART interfaces; one supports LIN,

IrDA, DALI, Smart Card, Manchester, and

three support low-power operation in STANDBY

mode

– Two I2C interfaces support up to FM+

(1 Mbit/s), SMBus/PMBus, and wakeup from

STOP mode

– Two SPIs, one SPI supports up to 32 Mbits/s

– One Controller Area Network (CAN) interface

supports CAN 2.0 A or B and CAN-FD

? Clock system

– Internal 4- to 32-MHz oscillator with up to

±1.2 accuracy (SYSOSC)

– Phase-locked loop (PLL) up to 80 MHz

– Internal 32-kHz low-frequency oscillator

(LFOSC) with ±3 accuracy

– External 4- to 48-MHz crystal oscillator (HFXT)

– External 32-kHz crystal oscillator(LFXT)

– External clock input

? Data integrity and encryption

– Cyclic redundancy checker (CRC-16, CRC-32)

– True random number generator (TRNG)

– AES encryption with 128 or 256-bit key

? Flexible I/O features

– Up to 60 GPIOs

? Two 5-V tolerant IOs

? Two high-drive IOs with 20-mA drive

strength

? Development support

– 2-pin serial wire debug (SWD)

? Package options

– 64-pin LQFP

– 48-pin LQFP, VQFN

– 32-pin VQFN

– 28-pin VSSOP

– 24-pin VQFN

? Family members (also see Device Comparison)

– MSPM0G3505: 32KB flash, 16KB RAM

– MSPM0G3506: 64KB flash, 32KB RAM

– MSPM0G3507: 128KB flash, 32KB RAM

? Development kits and software (also see Tools

and Software)

– LP-MSPM0G3507 LaunchPad? development

kit

– MSP Software Development Kit (SDK)

? Automotive qualification

– AEC-Q100 Grade 1 (-40°C to 125°C)

– 24 , 32 and 48 -pin QFN with wettable flanks

option

2 Applications

? Automotive body electronics and Lighting

? Automotive Gateway

? Steering Wheel Systems

? Automotive Motor Control

? DC to AC Inverters

? Automotive Interior Lighting

? Door handle modules

? Kick to open modules

? Vehicle Occupancy Detection

? Seat Comfort Module

3 Description

MSPM0G350x microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU

family based on the enhanced Arm? Cortex?-M0+ 32-bit core platform operating at up to 80-MHz frequency.

These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature

ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.

The MSPM0G350x devices provide up to 128KB embedded flash program memory with built-in error correction

code (ECC) and up to 32KB SRAM with hardware parity option. These MCUs also incorporate a memory

protection unit, 7-channel DMA, math accelerator, and a variety of high-performance analog peripherals such

as two 12-bit 4-Msps ADCs, configurable internal shared voltage reference, one 12-bit 1-Msps DAC, three

high speed comparators with built-in reference DACs, two zero-drift zero-crossover op-amps with programmable

gain, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two

16-bit advanced control timers, five general-purpose timers (with one 16-bit general-purpose timer for QEI

interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two

windowed-watchdog timers, and one RTC with alarm and calendar modes. These devices provide data integrity

and encryption peripherals (AES, CRC, TRNG) and enhanced communication interfaces (four UART, two I2C,

two SPI, CAN 2.0/FD).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital

integration allowing for customers find the MCU that meets their project's needs. The MSPM0 MCU platform

combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system

designers to increase performance while reducing energy consumption.

MSPM0G350x MCUs are supported by an extensive hardware and software ecosystem with reference designs

and code examples to get the design started quickly. Development kits include a LaunchPad available for

purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of

Code Composer Studio? IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are

also supported by extensive online collateral, training with MSP Academy, and online support through the TI

E2E? support forums.

For complete module descriptions, see the MSPM0 G-Series 80-MHz Microcontrollers Technical Reference

Manual.