利博·(集团)有限公司官网

1 Features

? AEC-Q100 Qualified for automotive applications:

– Device temperature grade 2: –40℃ to 105℃

? Deserializer aggregates data from up to 4 sensors

simultaneously

– Supports 7/8MP+ imagers

– Line rate at 7.55 Gbps

– Single-ended coaxial or Shielded Twisted-Pair

(STP) cable

– Power-over-Cable (PoC) support

? CSI v2.1 Compliant system interface

– Supports up to 2 MIPI CSI-2 output ports and 1

replication port

? CSI Port 0: MIPI CSI-2 output port

? CSI Port 1: MIPI CSI-2 output port

? CSI Port 2: replication port

– 16 Virtual Channels and VC-ID remapping

? MIPI D-PHY v2.1 compatible

– Up to 4 data lanes with 2 clocks per port

– Up to 2.5 Gbps per lane, 10 Gbps per port

? Quad CMLOUT output ports for off-board

processing

– 4 x CMLOUT ports replicated from 4 x FPD RX

ports

– Capable of driving another deserializer at the

same line rate

? 10 GPIO Pins for sensor synchronization and

diagnostics

? Dual I2C ports

? Frozen frame detection

? Automatic receiver equalization

? Compatible with DS90UB971-Q1, DS90UB981-

Q1, DS90UB953-Q1, DS90UB953A-Q1,

DS90UB951-Q1, DS90UB935-Q1, DS90UB933-

Q1, and DS90UB913A-Q1 serializers

? Low Power Sleep Mode with GPIO-state retention

2 Applications

? Automotive Driver Assistance Systems (ADAS)

? Security and surveillance

? Industrial and consumer remote cameras

? Medical imaging systems

3 Description

The DS90UB9702-Q1 is an FPD-Link deserializer that

delivers robust ultra-high-speed 7.55 Gbps forward

channel and 47.1875 Mbps Bidirectional Control

Channel for connecting up to four raw data sensors

to central processing units over an automotive coaxial

or STP cable. When coupled with DS90UB971-

Q1 serializer, the deserializer receives video data

from imagers supporting ultra-high resolutions (8MP+/

40fps) or multiple sensors in various topologies.

Data is received and aggregated into two MIPI CSI-2

D-PHY outputs for interfacing with a downstream

processor. An additional CSI port is used for port

replication. The flexible MIPI CSI-2 outputs support

multiple virtual channels interleaving per port to

differentiate multiple sensors, exposures, and data

types. This functionality features video aggregation

and replication modes and supports input-to-output

port as well as virtual channel (VC-ID) remapping.

Advanced data protection and diagnostic features

support overall system functional safety. Multiple

levels of data integrity checking and protection in

conjunction with programmable health status interrupt

helps ensure robust sensor module and link operation

in vehicles.