利博·(集团)有限公司官网

1 Features

? Vendor item drawing available, VID

V62/23633-01XE

? Total ionizing dose characterized at 30 krad (Si)

– Total ionizing dose radiation lot acceptance

testing (TID RLAT) for every wafer lot to 30

krad (Si)

? Single-event effects (SEE) characterized:

– Single event latch-up (SEL) immune to linear

energy transfer (LET) = 43 MeV-cm2 /mg

– Single event transient (SET) characterized to

43 MeV-cm2 /mg

? Wide operating range of 1.2 V to 5.5 V

? Single-supply translating gates at 5/3.3/2.5/1.8/1.2

V VCC

– TTL compatible inputs:

? Up translation:

– 1.8-V – Inputs from 1.2 V

– 2.5-V – Inputs from 1.8 V

– 3.3-V – Inputs from 1.8 V, 2.5 V

– 5.0-V – Inputs from 2.5 V, 3.3 V

? Down translation:

– 1.2-V – Inputs from 1.8 V, 2.5 V, 3.3 V,

5.0 V

– 1.8-V – Inputs from 2.5 V, 3.3 V, 5.0 V

– 2.5-V – Inputs from 3.3 V, 5.0 V

– 3.3-V – Inputs from 5.0 V

? 5.5 V tolerant input pins

? Output drive up to 25 mA AT 5-V

? Latch-up performance exceeds 250 mA per

JESD 17

? Space enhanced plastic (SEP)

– Controlled baseline

– Gold bondwire

– NiPdAu lead finish

– One assembly and test site

– One fabrication site

– Military (–55°C to 125°C) temperature range

– Extended product life cycle

– Product traceability

– Meets NASAs ASTM E595 outgassing

specification

2 Applications

? Enable or disable a digital signal

? Controlling an indicator LED

? Translation between communication modules and

system controllers

3 Description

The SN54SC3T97-SEP device features configurable

multiple functions with extended voltage operation

to allow for level translation.. The output state is

determined by eight patterns of 3-bit input. The user

can choose the logic functions MUX, AND, OR,

NAND, NOR, inverter, and noninverter. The output

level is referenced to the supply voltage (VCC) and

supports 1.2-V, 1.8-V, 2.5-V, 3.3-V, and 5-V CMOS

levels.

The input is designed with a lower threshold circuit to

support up translation for lower voltage CMOS inputs

(for example 1.2 V input to 1.8 V output or 1.8 V input

to 3.3 V output). Additionally, the 5-V tolerant input

pins enable down translation (for example 3.3 V to 2.5

V output).